Home › Washington, DC › Permit
Fencing permit at 113 P ST NW, WASHINGTON, DC 20001
FencingDemolitionFoundation
Work description
Demo and remove approximately 45 linear feet of existing fencing and associated materials Cut and remove existing embedded wrought iron fence sections at ground level using grinders, cutoff saws, and demolition equipment Section, demo, and haul off existing wrought iron fence materials and associated debris Existing embedded steel/posts below slab level to remain in place where practical in order to minimize unnecessary slab demolition and disruption to surrounding surfaces Construct new approximately 45 linear foot by 7 foot tall pressure-treated wood privacy fence Install new 6x6 pressure-treated fence posts spaced approximately 6 feet on center for structural rigidity and long-term durability Install new 6x6 pressure-treated posts in hand-dug post holes with compacted gravel base and concrete set around each post for stability Install horizontal structural framing/backing system as required for horizontal fence installation Install new pressure-treated horizontal privacy planking utilizing approximately 1x6 pressure-treated boards Horizontal planking to be installed on the side of the posts facing the driveway/parking area for clean finished appearance from parking side Install exterior-rated fasteners and corrosion-resistant hardware for long-term durability Fence located along the interior side property line on the alley side of the property.
Public record from DC Open Data (Dept. of Buildings). Owner name and contact details are not part of this open-data feed unless shown above. Verify details before use.
Get these leads in your inbox — free
One email a week with the newest permits for your trade and area. Tell us what you cover and we'll filter it for you. Unsubscribe anytime.